Skip to product information
1 of 6

poe-world

POE-8-ENC 8 Port 10/100mbps Data Speed, Mode B PoE Injector Support 12V-56V Power Input, Power Supply Not Inclueded

POE-8-ENC 8 Port 10/100mbps Data Speed, Mode B PoE Injector Support 12V-56V Power Input, Power Supply Not Inclueded

Regular price £19.95 GBP
Regular price Sale price £19.95 GBP
Sale Sold out

8 port wall mount PoE injector-Power supply was sold saparately

This midspan injector allows you to remotely power up to 8 devices up to 100 meters via a single ethernet cable. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af,” or you can use a 24 volt DC power supply to power 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more. This injector operates on mode B and power is “always on”.

Features:

  • Use with any PoE or non-PoE switch
  • 802.3af compatible
  • LED power display - green for 45 (+) and 78 (-) and red for reverse polarity
  • Wall mount
  • 10/100 data speed
  • Use with 30, 60, or 120 watt power supply
  • Power is distributed equally among each port
  • 2.1mm x 5.5mm DC plug
  • Quiet operation - no fan or cooling required
  • Operating temperature: 0°C ~ 50°C
  • Humidity range: 5% to 90% non-condensing

Product Specifications:

  • Size: 177.8 x 38.1 x 25.4 mm
  • Weight: 5 ounces

Other Options:

  • Gigabit options available
  • 4, 6, and 12 port Gigabit injectors
  • 8 and 12 port 100mb/s injectors

Similar Products: 

  • POE-12v60w
  • POE-24v30w
  • POE-24v60w
  • POE-24v120w
  • POE-48v30w
  • POE-48v60w
  • POE-48v120w
    View full details

    Frequently Questions About POE

    What is "POE"?

    PoE is " Power over Etherenet". A device like this one take DC power and injects on one or both pairs of wire in the Ethernet cable. It's used to power IP cameras, VOIP phones, Wifi Access Points and other networks devices.

    What is the difference between Mode A and Mode B?

    Mode A and Mode B are two different POE pinouts ( the wire pairs used to transmit power).

    Mode matters most if you're powering a 24-volt passive PoE devices like those from Mikrotik or Ubiquiti. These devices always need Mode B.

    If you're powering a devices that has a spec of “802.3af” (48 Volts), them eighter mode A or mode B should work.

    What does passive POE mean?

    Passive PoE means the PoE Injector is always on rather than negotiating with the powered device to turn on and off as need.

    Which power supply do I need?

    The power supply will depend on the specs of the powered devices. Most VOIP phones and IP cameras use 802.3af PoE, which requires a 48 volt power supply. For Wifi, check your device specs for either 802.3af or 24 volt passive.

    Need other support ?