poe-world
GPOE-6-AB-48v120w 6 Port Power over Ethernet Injector Gigabit POE with 48 Volt 120 Watt Power Supply
GPOE-6-AB-48v120w 6 Port Power over Ethernet Injector Gigabit POE with 48 Volt 120 Watt Power Supply
Couldn't load pickup availability
Add gigabit PoE to any Switch - power Mikrotik and Ubiquiti
• Replace up to 6 individual injectors with this single gigabit POE module
Wall Mounted gigabit 6 port PoE injector
• Extend power to 328 ft or 100 meters
Used to provide PoE power to:
• Unifi AC lite and AC LR Access Points
• Mikrotik
Features
6 Port Gigabit Ethernet Injector
– 6 Shielded RJ-45 LAN
– 6 Shielded RJ-45 LAN+POE
– all 4 data pairs connected
– transformer isolated power on POE side
• 10/100/1000Mbps operation
• Ground wire (for outdoor installations)
• Size: 6 x 1 x 2.25 inch wall mount ( 150 mm x 65mm x 26mm)
• Dual 650 ma automatic resettable fuse on each port – 1.3 amps in AB mode
• Same voltage to all ports power is equally shared as needed by the devices
• Use with any Ethernet switch – PoE or non-PoE switches
• Standard power connector - 2.1mm x 5.5mm
– Dual connectors
– for one or two power supplies
– Use two power supplies for redundancy or 802.3at mode
- Y adapter cable to share one power supply included with 120w versions
• Ideal for IP Cameras, VOIP phone, WiFi Access Points
• LED status indicator
• Operating Temperature – 0 to 65 deg C
• Select the power supply you need 12 to 56 volts
Power Supply Included
• 48 volts DC, 2.5 amps, 120 watts
• 110 to 220 volt AC operation
• 90% efficient
• UL, CE and FCC approved
• unique mounting holes
Package:
6 port gigabit poe injector *1
48Volt 120Watt power supply *1
Power cord *1
Y Cable ( This is for gift)
Frequently Questions About POE
What is "POE"?
PoE is " Power over Etherenet". A device like this one take DC power and injects on one or both pairs of wire in the Ethernet cable. It's used to power IP cameras, VOIP phones, Wifi Access Points and other networks devices.
What is the difference between Mode A and Mode B?
Mode A and Mode B are two different POE pinouts ( the wire pairs used to transmit power).
Mode matters most if you're powering a 24-volt passive PoE devices like those from Mikrotik or Ubiquiti. These devices always need Mode B.
If you're powering a devices that has a spec of “802.3af” (48 Volts), them eighter mode A or mode B should work.
What does passive POE mean?
Passive PoE means the PoE Injector is always on rather than negotiating with the powered device to turn on and off as need.
Which power supply do I need?
The power supply will depend on the specs of the powered devices. Most VOIP phones and IP cameras use 802.3af PoE, which requires a 48 volt power supply. For Wifi, check your device specs for either 802.3af or 24 volt passive.