poe-world
BT-6-48V480W| 6-Port Active PoE++ Injector Kit with 2.5G Speed and 480W Power Supply 90W Max Output for PTZ cameras, WiFi 6/6E access points
BT-6-48V480W| 6-Port Active PoE++ Injector Kit with 2.5G Speed and 480W Power Supply 90W Max Output for PTZ cameras, WiFi 6/6E access points
Couldn't load pickup availability
The BT-6-48V480W is a complete 6-port PoE++ (802.3bt) injector kit designed to deliver reliable, high-speed data and power to your most demanding devices. Each injector supports up to 90W per port and 2.5 Gigabit Ethernet speeds, making it ideal for powering modern IP cameras, access points, signage systems, and other high-power PoE devices.
This kit includes six modular BT-1-WM injectors, a 480W adjustable power supply (48–56V), and DIN rail mounting hardware. Its compact, efficient design allows easy installation in control cabinets, racks, or walls, giving you flexibility in deployment. The injectors support IEEE 802.3af/at/bt standards with active PoE negotiation and dual-mode output (Mode A/B).
With over 99% power efficiency and industrial-grade certifications, the BT-6-48V480W is a cost-effective, future-ready solution for growing PoE networks.
Kit Includes:
6 × BT-1-WM Injectors
1 × 48V 480W Power Supply (adjustable to 56V)
DIN Rail Mounting Brackets
3-Prong DC Power Cord
Injector Specs (BT-1-WM):
Ports: 1 × Data + PoE (Shielded RJ-45), 1 × Data Only (Shielded RJ-45)
Data Rate: 2.5 Gigabit
PoE Output: IEEE 802.3af/at/bt (Type 3 & 4), 4-pair and 2-pair supported
Max Output Power: 90W per port
Output Voltage: 48–57V DC
Max Current per Port: 1.61A
LED Indicators: Amber (PoE Available), Green (PoE Negotiated)
Power Input: 2.1mm x 5.5mm DC jack, 5.0mm terminal for AWG 16–20
Mounting: Wall or DIN Rail
Operating Temp: 0–50°C
Humidity: 5% to 90% RH
Dimensions: 88 × 30 × 42 mm
Power Supply Specs:
Input: 100–240V AC
Output: 48–56V DC (adjustable)
Max Output Current: 10A
Mounting: DIN Rail
Whether you're expanding an existing network or building out a new one, the BT-6-48V480W gives you the performance and modularity to scale as needed.
Upgrade your infrastructure today and power your network the smarter way — with PoE++ performance and simplicity.
Frequently Questions About POE
What is "POE"?
PoE is " Power over Etherenet". A device like this one take DC power and injects on one or both pairs of wire in the Ethernet cable. It's used to power IP cameras, VOIP phones, Wifi Access Points and other networks devices.
What is the difference between Mode A and Mode B?
Mode A and Mode B are two different POE pinouts ( the wire pairs used to transmit power).
Mode matters most if you're powering a 24-volt passive PoE devices like those from Mikrotik or Ubiquiti. These devices always need Mode B.
If you're powering a devices that has a spec of “802.3af” (48 Volts), them eighter mode A or mode B should work.
What does passive POE mean?
Passive PoE means the PoE Injector is always on rather than negotiating with the powered device to turn on and off as need.
Which power supply do I need?
The power supply will depend on the specs of the powered devices. Most VOIP phones and IP cameras use 802.3af PoE, which requires a 48 volt power supply. For Wifi, check your device specs for either 802.3af or 24 volt passive.