GAF-USBC Gigabit POE Splitter Extend Power for USB Type C Device up to 100M for Nest IQ Macbook Google Wifi

Product Description

This device works with any 802.3at switch, it takes the 44 to 56 volts from the PoE switch, and converts that voltage to USB-C standard voltages and removes power from the data - it works with gigabit data speeds. Can also work with an 802.3af switch if the output is used below 13 watts.

Intended for use with Cisco or similar PoE switches – this PoE solution appears like a standard Class 4, 25 watt device. The PoE switch can send either polarity, and only 2 pairs are required for power, 4 pairs for gigabit data, 2 pairs for 10/100.

The output is fully isolated from the input voltage. Grounding is of no concern. The output power is on a USB-C connector. The voltage is defined by a negotiation between the attached device and the GAT-USB-C. The supported voltages with copper AWG24 CAT-5e or better

Specifications
Data speed: 10/100/1000 mb/s
Input Voltage: 802.3af / 802.3at / passive 44 to 57 volts at 600 mA max
Output Voltage: determined by attached device
Internal power use: 400 mw ( keep alive 802.3af)
Operating Temperature: 0°C - 50°C
Data: Transparent
Isolation: 1500 Volts
Size: 107 x 50 x 25 mm
802.3at: Class 4
PoE Power input Pins: 1&2 and 3&6 – either polarity – mode A
4&5 + and 7&8 minus – mode B
Shielded RJ45
Data output: Shielded RJ45
Power out DC connector: Female USB-C
LED status on Female RJ45: Right - Power In active = Green
Left - Power out active = Amber

Typical Devices: Macbook, Apple iPad,Nest IQ and more