Skip to product information
1 of 5

poe-world

GAF-5v10W POE Splitter PoE separator, 1.35x3.5mm Male Connector, Gigabit 802.3af Power Over Ethernet Splitter for 5 Volt Wanscam Non-poe Device

GAF-5v10W POE Splitter PoE separator, 1.35x3.5mm Male Connector, Gigabit 802.3af Power Over Ethernet Splitter for 5 Volt Wanscam Non-poe Device

Regular price €19,95 EUR
Regular price Sale price €19,95 EUR
Sale Sold out
Shipping calculated at checkout.
GAF-5v10w--5 volt 10 watt 2 amp POE Splitter
PoE solution for 5V 2A CCTV IP Camera, powered by PoE Switch or PoE Injector

This device provides a low cost solution for delivering power to a 5 volt camera or other device over 328ft of network cable. This device allows power to be carried on 10/100/1000 networks with either 802.3af or passive injectors and switches with a CAT5e, CAT6 or CAT7 Ethernet network cable.

Intended for use with Cisco or similar PoE switches – this active PoE solution negotiates with the switch to activate power and provide it to the client device. It is a compact and cost effective power solution.

The PoE switch supplies 48 or 56 volts DC at the source location. The higher DC voltage means the current is reduced by a factor of 9, and then carried with less loss over the 10BASE-T or 48v source and 5v converter allows you to extend the distance with this product for this application up to 328ft or 100 meters.

Specification
Power and data source input: RJ 45 female connector
DC output:1.35mm x 3.5mm male connector
Data only connector output: 10/100/1000 Ethernet (Gigabit) –RJ45 male
802.3af/at PoE, 44V to 57V
Use this splitter to power any 5 volt device remotely
Extend power to 328 ft/100M
Works with any PoE switch, 48v injector not included
Certificates: CE RoHS

Typical Cameras
Foscam W series Tenvis, Wansview, Maygion, EasyN, Apexis, EasySF,
Dropcam, Vstarcam, any 5v device
Other adapters available for 2.5 mm x 5.5mm devices, 2.1mm x 5.5mm et
View full details

Need Other Support ?